Commercial and Industrial Building Products

Super-Span®

Super-Span®

Super-Span is an economical and simple to install, structural, through-fastened roof or wall panel suitable for all-around general usage.

Product Specifications 

Super-Span®
  • 1¼” high trapezoidal major ribs at 12” on center with one minor rib between each major rib

Features / Benefits 

  • Super-Span has been tested in accordance with UL-580 and meets UL Class 90 wind uplift test requirements.
  • Structural spanning allows panel to be installed over solid substrates or spaced support members.
  • Full-bearing sidelap rib provide's consistent weather-resistant joint.
  • Provides traditional metal roof or wall appearance with 1-1/4" high trapezoidal major ribs at 12" on center with one minor rib between each major rib.
  • Tested for air infiltration per ASTM E-1680, and water infiltration per ASTM E-1646 (with field-applied side-lap sealant).
  • Panel assemblies are Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC.   Panel assemblies are also Class A Fire Rated per UL790 when installed in accordance to UL listings.  Refer to UL Listings & Specifications for information.
  • Manufactured with high tensile steel for greater load capability.
  • Matching trim packages are vailable in the same gauge and color as the roof panel.
  • Fiberglass skylight panels are available in the matching profile.
  • Can be installed on pitches as low as 1:12 with field applied mastic.
  • Can be crimp curved to accommodate radiused applications.
  • 26 gauge Super-Span® available in a wide variety of standard cool colors with the Dura Tech® nt coating system. Also available in bare ZINCALUME® or Galvalume® Plus.
  • 22 and 24 guage Super-Span® is also available in a wide variety of standard Dura Tech® 5000 cool colors.
  • Manufactured in Fontana, CA and Tacoma, WA.
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to
    as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a
    defect, and therefore is not a cause for panel rejection.

Colors and Warranties